Difference between revisions of "Septic Tank Problems"
(Created page with '<p><b><font size="5">Septic Tank Problems</font></b><br> <br> Septic tanks and systems are, by nature, designed to function properly without problems or the need of human interv…') |
(No difference)
|
Revision as of 20:06, 15 September 2009
Septic Tank Problems
Septic tanks and systems are, by nature, designed to function properly without
problems or the need of human intervention or maintenance. For well over 100
years, septic tank systems have been serving as a simplified solution to a
never-ending supply of waste which is produced in the hundreds of millions of
tons per year range.
Since their inception, septic tanks have worked very much the way they were
designed and have functioned so well that they were the leading choice of
officials and regulators – second only to public wastewater systems where
buildings are directly linked to municipal lines.
Septic tank systems are not foolproof and can run into problems. Most systems
are connected to a leach or drainfield at some point and the connection is
usually made by buried piping and lines that allow safe passage for the
wastewater to travel from the tank, to the filed. The buried lines and the tank
itself can be damaged or shifted as a result of heavy weight (such as heavy
equipment driving over the area where the tank is located), ground movements
such as natural shifting and severe storms can also saturate soil to a point
that the system shifts. A damaged system may not function at 100% and can lead
to odors, wet spots and back-ups.
Tree roots also play a major role in septic tank problems. Root systems can
easily break through piping and tank walls and can act as a mesh shield
preventing waste from flowing properly. Planting trees or large shrubs around
your drainfield can result in unwanted roots within your system that can lead to
sever problems – even complete stoppage.
Septic tank systems often see a massive accumulation of Bio-Mat (Black tar like
substance that clogs the lines and filed soils) due to improperly digested raw
sewage. Modern anti-bacterial products kill off the naturally occurring strains
within all systems – leading to undigested sludge clogging the field and
resulting in the same odor, wet spot and backup problems.
If your home or establishment is connected to a septic tank system, keep these
handy tips in mind so as to prevent a costly unnecessary repair bill in the
future.
• Never allow heavy equipment to drive on or near your septic tank, lines or
drainfield.
• Don’t use the area above your septic system as a parking area. Even lighter
automobiles can shift surface areas causing damage below ground.
• Avoid planting trees or shrubs within the surrounding areas of your total
system. Deep rooted foliage can enter a systems barrier within a few years and
can cause massive damage.
• Avoid using anti-bacterial products unless you are on a monthly bacterial
boosting maintenance treatment. Anti-bacterial products kill off healthy
bacterial and can completely stall a healthy system.
• Never pour paints, oil or grease down into your system. Again, these chemicals
kill bacteria rapidly and quickly clog lateral lines, gravel and subsurface
soils.
• Never enter your septic tank system; Toxic gases are deadly and can kill in
seconds.
Use common sense in controlling the area around your system and keep any access
covers in tip top shape. Loose fitting tank covers are an accident waiting to
happen and can be a severe hazard for small children and pets.
If your system is failing or running into problems, consider a bacterial
treatment for sludge digestion for in most cases, sludge and roots are the
number one cause of backups. If your problem is due to mechanical damage, seek
the assistance of a reputable septic technician in your area and be sure to get
at least three opinions before digging up your tank or field.